Model |
1036
series |
Analyzing
Items |
Concentration
of the Hydrogen peroxide, Sulfuric acid, copper |
Range |
Hydrogen
peroxide: 0~150 g/§¤, Copper:0~60 g/§¤ |
Accuracy |
Hydrogen
peroxide: Within 1%, sulfuric acid:3%, Copper:Within 5% |
Unit |
g/§¤,
%(wt/vol), vol%, mol/§¤ |
Analysis
time |
Within
15min, varied by the concentrations of the items. |
Input |
Start
signal for the titration(non voltage a-contact input) |
Output |
H2O2
supplememt output, H2SO4
supplement output
Copper concentration control output
H2O and H2SO4 concentration
alarm output
Copper concentration alarm output, System alarm output
* Output contact capacity:
AC75-240V Max 1A [not applicable to DC switching] The
supplement signals are the duration output for the supply-pump,
of which time
is calculated by the control concentration, measured concentration,
process chamber volume, supplied
concentration and pump performance.
In addition, protection timer for the over supplement
is provided independently. |
Printer |
Thermal
dot-matrix type. Paper width: 58mm |
Case |
PVC.
Color: blue. |
Size
and weight |
Width:
335mm, Height: 260mm, Depth: 480mm, Weight: about 17kgs |
Usable
condition |
10
¢ªC-40 ¢ªC ----Would
not humidify under 80%Rh |
Power |
AC100V±10% ---50/60§Ô
----about 100W |